Green-CleanUSA KV-P00801 - Manual (Page 25)

8/16-Port PS/2 KVM Switch
25 / 26
7. Troubleshooting
The following guide is intended to assist users to solve possible issues from
operating or installing PS/2 KVM.
i. After hardware installation, please affix label to all cable to assist in
future maintenance.
ii. The maximum KVM cable distance is approximately 100 inches when
high quality cable is used.
iii. The PS/2 KVM is implemented with dual power design to collaborate with
dual powered server system. The power input with “back up” label is
optional. If second power source is required please contact your
distributor to purchase additional power adaptor.
iv. PS/2 KVM uses standard polarity power adaptors (tip negative/barrel
positive)
v. As computer booting up please do not perform switching (push button or
hot-key operation) to prevent unforeseen situation.
vi. If keyboard or mouse is not operating, please try to connect keyboard or
mouse directly to the computer without PS/2 KVM. Please check if
keyboard or mouse is working properly.
8. Optional Accessories
A. USB to PS/2 Converter
To connect keyboard and mouse from PC, iMAC, Sun Microsystem with USB
interface to PS/2 KVM, please use USB PS/2 converter.
B. KVM CAT5 Extender
The maximum distance between PS/2 KVM and computers is 100”. To
extend beyond this distance please use a KVM Cat5 Extender.