Graco 8487 - Manual (Page 30)

30
1. Place car seat firmly
against the back of a
forward-facing vehicle
seat equipped with a
lap/shoulder belt only.
2. If you want to use tether
to hold seat in place,
secure it now. See
Section 8.1 Using the
Tether, page 31.
3. Place child in car seat
with child’s back flat
against back of car seat.
4. Position lap/shoulder
belt as shown
Ê
.
Fasten buckle and pull
up on the shoulder belt
to tighten.
5. If belt lays across child’s
neck, head or face,
redirect belt across chest
using the shoulder belt
positioner. Thread vehicle
shoulder belt through one
of the three positioners
exactly as shown
Ë
.
6. Check that shoulder belt
is properly positioned
over shoulder and snug
against child.
К
Л
7.2 Securing Child and Booster
Seat in Vehicle