Graco 8487 - Manual (Page 33)

8.3 Airplane Use
8.4 Accessories
(on certain models)
1. Insert the two prongs
of the cupholder into
the two slots on either
the left or right side of
the seat
Ë
.
2. Push cupholder down
until the clip snaps onto
the bottom of seat
Ì
.
CHECK that cupholder
is secure by pulling on it.
This restraint is certified for use in Motor Vehicles. It is
certified for use in Aircraft ONLY when used with the
built-in harness. When used as a booster without
the harness, this restraint is NOT certified for use
in aircraft because there is no shoulder belt available.
Important points to remember
1. Airlines have some restrictions about the use of
car seats.
2. Install your car seat on an airplane in the same way
it is installed in an automobile with a lap belt (see
Section 6.2.1, Securing the Car Seat in Your
Vehicle with a Vehicle Lap or Lap/Shoulder Belt,
pp. 22-23).
3. Check that the airplane seat belt holds the car seat
securely in place at all times.
Clip
Л
М
33