Loading the dishwasher racks – GE 165D4700P389 49-55065 07-09 JR User Manual

Page 14

Advertising
background image

Operating Instructions

Safety Instructions

Consumer S

uppor

t

Tr

oubleshooting Tips

14

Loading the dishwasher racks.

For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware
baskets may vary from your model.

Upper Rack

Although the upper rack is primarily for
glasses, cups and saucers, pots and pans can
be placed in this rack for effective cleaning.
Cups and glasses fit best along the sides. This
is also a secure place for dishwasher plastics.

The utility shelf (some models) may be placed
in the up or down position to add flexibility. A
wine glass holder (some models) secures wine
glasses for best washability.

Some models have contoured metal cup
shelves that can secure up to 12 wine glasses
(as shown).

Because wine glasses come in various sizes,
after loading, slowly push in the rack to make
sure they will clear the top of the dishwasher.

Some models have an Angled Rack System,
which allows you to angle your dishes, such
as coffee mugs, for better cleaning and
quicker drying. To position the tines, pull the
lever forward then drop the tines into
position, then release the lever.

The upper rack is good for all kinds of
odd-shaped utensils. Saucepans, mixing
bowls and other items should be placed face
down. Fold-down tines (on some models)
provide flexibility for extra-large and hard-
to-fit items.

Secure larger dishwasher-safe plastics over
2 tines when possible.

Make sure small plastic items are secure so
they can’t fall onto the heater.

Be sure that items do not protrude through
the bottom of the rack and block rotation of
the middle spray arm. This could result in
poor wash performance for items in the
upper rack.

Check to make sure that no items will block
rotation of the wash arm.

NOTE: The Single Rack Wash selection, on
models with this feature, washes the upper
rack only. If you use this feature, do not load
items in the lower rack.

Adjustable Upper Rack

(on some models)

The standard position of your adjustable rack
is “up” which allows for maximum clearance
for your taller items in the lower rack. If you
have taller wine glasses, tumblers or other
items to place in the upper rack, you may
want to adjust the rack to the lower position.

To lower the rack, support the weight of the
rack with your hands as shown and press
both finger pads about 1/4

″ toward the inside

of the rack as indicated and guide the rack
down to its lower position.

To raise the rack to the “up” position, pull up
on the center of the rack side frame until the
rack locks into place.

Advertising