Connecting to a dvd player or vcr – Gateway 205 User Manual
Page 21
19
Connecting components
www.gateway.com
Connecting to a DVD player or VCR
If you are using composite video to connect the DVD player or VCR, follow
these instructions. If you are using S-Video to connect the DVD player or VCR,
go to “To connect the projector to a DVD player or VCR using S-Video:” on
page 20.
To connect the projector to a DVD player or VCR using composite video:
1
Plug the yellow composite video cable connector into the Video port on
the back of the projector, then plug the yellow, white, and red connectors
on the other end into the corresponding line out ports on the back of the
DVD player or VCR.
2
Plug the remaining red and white audio connectors from the composite
video cable into the corresponding ports on the back of an audio receiver.