Gateway 205 - Manual (Page 28)

26
Using the Gateway 205 Projector
www.gateway.com
Shutting down the projector
To shut down the projector:
1
Turn off all connected components.
2
Press the POWER button on the projector. A warning message appears.
3
Press the POWER button again to turn off the projector.
4
Wait until the fan stops, then disconnect the power cable.
Warning The projector needs a 90-second cool-down period. Do not
disconnect the power cable until the fan stops, or you may
damage the projector.
Important After the projector fan has been turned off and the fan
stops, you must wait for 90 seconds before you can start
the projector.