GE 169233 - Manual (Page 14)

14
TROUBLESHOOTING
problEM CAusE soluTion
Creases are not
removed. • The fabric setting is not
suitable.
• The spray function or the
steam burst function is
not used.
• Set the fabric setting
button
(7) to the correct
temperature according to
the fabric label.
• Use the spray function or
the steam burst function
to remove stubborn
creases.
fabric setting
display
(7) and
color-changing
indicator
(13)
flash quickly.
• The set temperature has
not been reached yet. • Wait until the flashing
stops.
fabrics are
scorched. • The set temperature is
too high. • Set fabric setting button (7)
to correct temperature
according to fabric label;
wait for the fabric setting
display
(7) and color-
changing indicator (13) to
stop flashing.
fabric setting
display
(7) and
color-changing
indicator
(13)
flash slowly.
• Automatic shut-off
function has been
activated. • Move the iron and allow it
to reheat.
If additional assistance is needed, please contact our Customer Assistance at
1.877.207.0923 (U.S.) or 1.877.556.0973 (Canada).
TECHNICAL dATA
Rated voltage: AC 120 v~, 60Hz
Rated power input: 1500W
Iron-169233-05 (GB).indd 14 1/11/10 9:59 AM