GE 71045 - Manual (Page 12)

12
6. Place new belt around motor shaft.
. . . . .
Left side view
7. Place belt around brush roll pulley.
8. Pull right side of brush roll to stretch belt. Secure
right end cap into base.
9. Align left end cap with square in base. Push end
cap into place; see left side view.
10. Rotate brush roll to seat belt.
11. Replace the hood. Make sure hood front is behind
furniture guard.
12. Tighten screws.
Use GE brand replacement belt, Style GE-1,
Part No. 106615.
Disposable Dust Bag and Filters
The disposable dust bag plays a very important role
in the efficiency of a vacuum cleaner. The purpose of
the paper bag is to trap dirt. As the bag traps dirt, it
must also be porous enough to allow air to pass on
through. If the paper bag becomes clogged, no air
can pass through the cleaner and no cleaning can take
place regardless of how powerful the unit. Change
the dust bag and check the filters frequently. Some
fine particles can restrict airflow very quickly and will
decrease performance even before the bag appears
to be full.
When vacuuming carpet fresheners or cleaners,
powder, plaster dust, or similar fine substances, the
bag and filters may require more frequent
maintenance.
5
6
7
8
9
1. Release bag cover by rotating bag cover latch to
the left pointing to the unlock symbol ( ). Pivot
bag cover away from cleaner and remove.
Bag Cover
Latch
Bag Cover
How To Replace Bags–Style GE-1
CAUTION: Turn off the switch and unplug the
electrical cord before changing dust bag.
Never operate the vacuum cleaner
without the dust bag or the filter.
To Remove Bag: