GE 71045 User Manual
Page 6
5.
You will find your cord retainer on the handle
above the upper cord hook. Firmly push the
electrical cord down into the cord retainer. This
will place the cord out of the way the next time
you vacuum.
6.
Next wind the cord around the two cord hooks
on the back of the cleaner.
7.
Secure the plug to the cord to prevent
unwinding.
Cord
Retainer
6
Cord
Hook
Step E Store Electrical Cord
Step D Store Accessories
Crevice
Tool
Cord
Hook
5
6
6
Nesting
Extension
Wands
Dusting/
Upholstery
Brush
Step C Replace Bag Cover
NOTE:
Make sure bag is properly installed. Check to
see bag has not shifted away from bag inlet
during shipping. See page 13 for further
instructions.
#
#
#
#
#
4. Replace front cover by aligning tabs at bottom of
front cover into groove on cleaner. Pivot front
cover up against cleaner and rotate the bag cover
latch to the right to secure.
Bag Cover
Latch
Groove
Tabs
Bag Inlet