Filters, Filters -14, Cleaning and replacing filters – GE 71045 User Manual

Page 13: Motor filter

Advertising
background image

13

To Remove Bag:

(continued)

2. Grasp the paper bag collar and pull bag out away

from unit.

To Replace Bag:

3. Locate channels (A). Fold collar of new bag (B) back

and slide into channels making sure hose inlet (C)
goes into bag opening.

4. Tuck bag into bottom and along sides.

5. Place tabs on lower part of front cover into cleaner

slot. Close cover. Make sure disposable bag is not
caught under front cover.

Motor Filter

Check the motor filter with each disposable dust bag change. Clean or replace as needed. Never operate without
motor filter in place.

Cleaning and Replacing Filters

(B)

Paper Bag

Collar

Use GE brand replacement motor filter, 61455-1.

Use GE brand replacement bag, Style GE-1,
Part No.106605.

Bag

Compartment

Motor

Filter

(A)

Channels

(C)

Hose Inlet

To Clean/Replace Motor Filter

1. The motor filter is located at the bottom of the bag

compartment. Remove bag compartment cover and
dust bag. Lift motor filter up and out of the unit.

2. Replace motor filter or clean. To clean motor filter

shake filter to remove excess dust. If necessary, the
filter can be cleaned by vacuuming with another
cleaner.

3. Reinstall filter by placing smooth side down in the

bottom of the bag compartment. Replace dust bag
and bag compartment cover.

Advertising
This manual is related to the following products: