Installation instructions, Installation – Stovax Ceramica Coal Effect Stove Range Conventional Flue User Manual

Page 12

Advertising
background image

12

3.9

Place the flame baffle onto the shelf at the rear of the tray

and push up against the rear ledge, see diagram 7.

3.10 Locate the front coal moulding in front of the flame baffle

ensuring that the end legs sit flat against the burner skin, see

diagram 8.

3.11 Place three large coals on the front coal so that they lean

against the flame baffle, and the four large coals on the

flame baffle so that they sit on the fingers, see diagram 9.

3.12 Place two small coals at each end of the front coal so that

they lean against the flame baffle, and a further two large

coals on the flame baffle, one at each end, see diagram 10

3.12 Place five small coals along the rear of the flame baffle,

resting against the rear ledge, see diagram 11.

3.14 Ensure that the fibreglass seal on the back of the door is intact,

locate the door on the four studs and slide back to the firebox.

Secure in place using the four dome nuts and the tool

supplied, do not over tighten the nuts, see diagram 12. Keep

the tool with these instructions for future use.
NEVER OPERATE THE STOVE WHEN THE DOOR IS

REMOVED OR WHEN THE GLASS IS BROKEN.

INSTALLATION INSTRUCTIONS

INSTALLATION

Medium Ceramica

7

AR0365

8

AR0366

9

AR0367

10

AR0368

11

AR0369

12

AR0390

Advertising