Windows xp – Garmin STYLUS 3880 User Manual
Page 14
14
Setting Up Your System for Network Printing
The necessary components are now installed. Go to the section “Connecting
the Network Interface to the Network” on page 16.
Windows XP
For Windows XP, use the following procedure to install the necessary
components.
Note:
The Windows XP CD may be required during the installation.
1. Click Start, select Settings, click Control Panel, and then select Network
Connections.
2. Under LAN or High-Speed Internet, right-click the Local Area
Connection icon and choose Properties.
3. Check if the following network components are in the list. If they are
already installed, go to “Connecting the Network Interface to the Network”
on page 16.
The following table lists the network components required for configuring
the network interface with EpsonNet Config.
EpsonNet Config’s setting screens
Necessary components
TCP/IP, SNMP (IP trap)
Internet Protocol (TCP/IP)