Garmin 100 BLUE - Manual (Page 26)

18
Unit Operation
Setup Menu: Chart Tab
Scale
The depth ‘Scale’ is displayed vertically along the right side of the chart.
The depth ‘Scale’ can be configured to display in four different modes: as an
‘Overlay,’ in the ‘Corners,’ with ‘Basic’ or ‘No Scale.’
To change the Scale Setting:
1. Highlight the ‘Chart’ tab on the Setup Menu.
2. Highlight the ‘Scale’ selection fi eld and press ENTER.
3. Choose ‘Overlay,’ ‘Corners,’ ‘Basic’ or ‘No Scale,’ then press ENTER to
accept the selection.
Scale — ‘Overlay’ Scale — ‘Corners’ Scale — ‘Basic’ Scale — ‘No Scale’
FF 100 Blue.indd 09/18/01, 2:58 PM 18