GE Monogram GE Fanuc Automation GFK-1115 - Manual (Page 127)

GFK-1115 Chapter 6 Demo Project 6 - 31
6
5. Insert an output field that will display the value that is entered in the first input field, into the
picture. This is done as follows:
●
Position the cursor at (11,6).
●
Press F2 Field.
●
Select the Output Field from the Field Class window and press the
↵ ↵
key.
●
Select the Output Word (unsigned) from Select Field Type, which opens the window in
which the parameters for the selected input field can be entered/changed:
●
Enter OUT_WORD as the Destination Tagname and confirm the entry by pressing
↵ ↵
. The
declaration of this address is done collectively for all variables in the connection editor
(see “Editing the Connections” in this chapter).
●
To display preceding zeros, move the cursor to the Display leading zeros line and enter
Y followed by
↵ ↵
to activate the leading zeros display.
●
End the definition with F4 Accept. The Output Word (unsigned) window is closed. The
output field is displayed again: