6err_pic picture (error picture) – GE Monogram GE Fanuc Automation GFK-1115 User Manual

Page 146

Advertising
background image

6 - 50

PANELWARE MMI Application Manual for GE Fanuc Genius Protocol -

June 1995

GFK-1115

6

ERR_PIC Picture (Error Picture)

The error picture is displayed if an error occurs in the
communication with the PLC. Three internal variables
containing notes on the cause of the error are displayed
in the picture (for more information on these variables
see Appendix D “Internal Variables” in the
PANELWARE™ Configuration Software Reference
Manual –
GFK-0849).

To create this picture, complete the following steps:

1

.

Call the picture editor from the main menu with key combination Ctrl + B (see page 6-23).

2

.

Insert all lines and text into the rectangle so that it looks like the one in the screen shown
below:

3

.

In cursor position 12,5 insert an output field Output Bit/Byte with the following parameters:

Position:............................................. 12,5
Number of Digits: ..............................

3

Places after the dec. point:..................

0

Character size: ...................................

1

Field width:........................................

3

Tagname:...........................................

ERR_NR/DI

Display leading zeros? (Y/N): ............

No

Scaling? (Y/N): ..................................

No

4

.

Insert an output field Output String in cursor position 19,5 with the following parameters:

Position:............................................. 19,5
String length: .....................................

10

Character size: ...................................

1

Tagname:...........................................

ERR_NAME/DI

5

.

Insert an output field Output String in cursor position 32,5 with the following parameters:

Position:............................................. 32,5
String length: .....................................

2

Character size: ...................................

1

Tagname:...........................................

ERR_NODE/DI

6

.

Assign function key F8 with LED function Key LED blinking slow. This is explained in step
5 under “Main Picture” on page 6-26.

7

.

Save the picture under the name ERR_PIC.

Advertising