GE Monogram GE Fanuc Automation GFK-1115 - Manual (Page 135)

GFK-1115 Chapter 6 Demo Project 6 - 39
6
●
Confirm your entry with F4 Accept. The key function is inserted and indicated by the
character T:
●
Move the cursor to key F2 now. Perform those steps described again. Enter
DATE_SET/DI for the Tagname and a 1 again for the Value 1.
●
Press F4 Accept to confirm and save this entry and then press F10 to close the LED/Key
Functions window. The main PCS menu appears again.
7. Now, the LED functions have to be defined.
●
Function keys F1, F2 and F4 are all assigned LED function Key-LED switched on.
●
A description of LED function assignments for the individual keys can be found in step 5
under “Main Picture” (see page 6-26)
8. Save the picture under the name CLOCK :
●
Press Esc or F10 Exit.
●
PCS warns you that the picture is not yet saved.
●
To save the picture, enter Y .
●
Enter the name CLOCK in the Save Picture window and press the
↵ ↵
key. The picture is
saved and the main menu appears again.