Gentek 3980400 - Manual (Page 63)

58
Chapter 7: Accessorizing and Modifying Your Filtered Enclosure
2. Guardian™ LED Airflow Monitor
The Guardian LED Airflow Monitor allows you to
continuously monitor airflow through the enclosure. The
Guardian LED monitor can be placed on any Purifier
enclosure.
Description Order Part #’s Individual Parts Required
Guardian Airflow Monitor
115V or 230V
1 ea. 3811500 Airflow Monitor Printed Circuit Board
1 ea. 3910700 Airflow Sensor w/ Connector
2 ea.
1885405
#6-32 x .31" Phillips machine screw to
mount Airflow Monitor Circuit Board
2 ea.
1891808
#6-32 x .50" Phillips thread cutting screw to
mount Airflow Sensor
3. Exhaust Transition Kits for Ducting to Outside
Exhaust transition connects to the enclosures with integral
motorized impellers from the top so the duct can be routed
up and outside the building. The transition is available for
6" PVC duct. The transition should be sealed to the top of
the enclosure with silicone sealant to prevent leaks. See
Figure 3-3.
Order the following:
Part Description
3924400
2' Exhaust Transition Kit
3924401 3' Exhaust Transition Kit
3924402 4' Exhaust Transition Kit
4. Remote Blowers
For Purifier Class I Enclosure
The remote blower has 1/4 hp direct drive motor and
corrosion-resistant epoxy-coated steel housing and wheel
with blower inlet of 5.94" OD. sized to accept 6" nominal
PVC duct. Includes a blower transition adapter outlet for
6" PVC duct with integral back draft damper.
CFM @ Static Pressure-Inches of H
2
O
S.P. 0.0" 0.125" 0.25" 0.50" 0.75" 0.87"
CFM 595 560 515 420 300 167