44 infotainment system – GM GPS Receiver User Manual

Page 44

Advertising
background image

Black plate (44,1)

Cadillac SRX Navigation System - 2011

44

Infotainment System

Video Screens

The video screens are located in
the back of the driver and front
passenger seats.

To use the video screen:

1. Push the release button located

on the seatback console.

2. Move the screen to the desired

viewing position.

Push the video screen down into its
locked position when it is not in use,
the screen turns off automatically.

Only the left RSE seatback console
contains the infrared transmitters for
the wireless headphones, they may
be visible as eight illuminated LEDs.
These LEDs are not on the right
video screen. Both seatback
consoles contain an infrared
receiver for the remote control.
They are located at the top of each
console.

Notice: Avoid directly touching
the video screen, as damage may
occur. See “Cleaning the Video
Screen” later in this section for
more information.

Video Screen Input Jack

Each video screen is equipped
with a video input jack to allow
video cables to be connected
from an auxiliary device such as a
camcorder or a video game system.
This signal will override any video
provided by the RSE system; either
the DVD or Auxiliary A/V jack
source. The RSE system must be
on for this input to operate.

Remote Control

To use the remote control, aim it at
the transmitter window at either
seatback console and press the
button. Direct sunlight or very
bright light could affect the ability
of the RSE transmitter to receive
signals from the remote control.

Advertising