GM GPS Receiver - Manual (Page 64)

Black plate (64,1) Cadillac SRX Navigation System - 2011
64 Infotainment System
Lat/Long Coordinates
Choose a destination based
on Latitude and Longitudinal
coordinates.
Enter in the location as coordinates,
Latitude and Longitude.
1. Press the DEST control button.
2. Press the Lat/Long screen
button.
3. Enter the coordinates for the
destination in degrees, minutes,
and seconds.
4. Press the Go screen button. The
route calculates.
5. Select the route preference for
Fastest, Shortest, or Easiest.
See “Navigation Settings” under
Configure Menu on page 71 for
more information.
6. Press the Start Guidance screen
button and start the route.
Preset Destination
Set a destination by selecting
from one of six previously stored
destinations. If a destination is not
set for one of the screen buttons,
the button dims and is not available
to use. See “Adding or Changing
Preset Destinations” later in this
section for information on how to
add a preset destination.
1. Press the DEST control button.
2. Press one of the available
Preset Destination screen
buttons. The screen buttons
were stored with the name
selected. The route is
calculated.
3. Select the route preference for
Fastest, Shortest, or Easiest.
See “Navigation Settings” under
Configure Menu on page 71 for
more information.
4. Press the Start Guidance screen
button and start the route.
Getting Started on the Route
Several functions can be performed
after a destination has been
entered. Press the DEST control
button to access the Route Menu
screen.