GM GPS Receiver - Manual (Page 72)

Black plate (72,1) Cadillac SRX Navigation System - 2011
72 Infotainment System
To turn XM NavTraffic on or off:
1. Press the CONFIG control
button to enter the Config setup
menu. Turn the MENU/SELECT
knob until Nav displays. press
the MENU/SELECT knob or
press the Nav screen button to
display the other options.
2. Press the Traffic Information
screen button.
3. Select the Traffic button. This
button highlights and a check
mark displays when active.
Selecting Alert for Approaching
Traffic Events displays a screen
to notify of possible traffic events
ahead.
Traffic Icon
When traffic conditions are found
in the local area, the Traffic Icon
appears in the lower left-side of
the map.
The Traffic Icon has three different
condition displays. These are:
. No icon displays if there is no
XM NavTraffic™ subscription or
traffic events.
. A single car icon displays if
there are traffic events in the
area, but none are on route.
. A multiple car icon displays if
there are traffic events on the
route.
It could take some time to sort the
received information. The list of
traffic conditions display in the order
of distance from the vehicle, for up
to approximately 125 km (75 mi).
With a route planned, traffic events
display on the route. Not all traffic
conditions may display.
To view the traffic condition location
and information on the map:
1. Press the NAV control button to
show the map, then press the
MENU/SELECT control knob for
the map menu.