Greenway Home Products GWF7 - Manual (Page 6)

5
“QUICK” TIPS
FIGURE A
FIGURE B
Cleaning the Water Filtration System
The outside of the water filtration system can be wiped with a damp
cloth at any time.
When the multi-stage filter is being replaced you should rinse out the
top and bottom sections of the upper and low chamber.
After replacing the multi-stage filter, ensure to thoroughly rinse out the
top and bottom chambers.
IMPORTANT: ALL PARTS ARE NOT DISHWASHER SAFE!
1. Soak the multi-stage filter in cold tap
water for 30 minutes before using.
2. Remove the bottle support on your water
dispenser by turning counter-clockwise
and lifting it up. The water filtration system
will not operate with a piercing valve and
the float mechanism must be
unobstructed. (FIGURE A)
3. Please ensure the float valve is securely in
place by screwing it into the bottom of the
lower chamber. DO NOT OVER TIGHTEN.
(FIGURE B)