About the automatic icemaker, About the ice and water dispenser – GE 162D9617P005 User Manual

Page 14

Advertising
background image

Automatic Icemaker

The icemaker will produce eight cubes per

cycle—approximately 120 cubes in a 24-hour

period, depending on freezer compartment

temperature, room temperature, number

of door openings and other use conditions.
If the refrigerator is operated before the

water connection is made to the icemaker,

keep the feeler arm in the STOP (up)

position.
When the refrigerator has been connected

to the water supply, move the feeler arm to

the ON (down) position.

The icemaker will fill with water when it cools

to freezing. A newly-installed refrigerator may

take 8 to 12 hours to begin making ice cubes.
Throw away the first few batches of ice to

allow the water line to clear.
Be sure nothing interferes with the swing of

the feeler arm.
It is normal for several cubes to be joined

together.
If ice is not used frequently, old ice cubes

will become cloudy and taste stale.

Customer Ser

vice

Tr

oubleshooting T

ips

Operating Instr

uctions

Safety Instr

uctions

Installation Instr

uctions

Customer Ser

vice

Tr

oubleshooting T

ips

Installation Instr

uctions

Safety Instr

uctions

Operating Instr

uctions

Customer Ser

vice

Tr

oubleshooting T

ips

Installation Instr

uctions

Safety Instr

uctions

Operating Instr

uctions

About the automatic icemaker.

A newly-installed refrigerator may take 8 to 12 hours to begin making ice.

Ice Storage Bin

Feeler arm in the
STOP (up) position

Feeler arm in the

ON

(down) position

14

About the ice and water dispenser.

On some models

To Use the Dispenser

Press the rim of the glass gently against the

dispenser pad.
Select CUBED ICE , CRUSHED ICE

(on some models) or WATER .
The spill shelf is not self-draining. To

reduce water spotting, the shelf and its grille

should be cleaned regularly.

If no water is dispensed when the refrigerator is
first installed, there may be air in the water line
system. Press the dispenser pad for at least two
minutes to remove trapped air from the water
line and to fill the water system. To flush out
impurities in the water line, throw away the
first six glassfuls of water.

A light switch (on some models) turns the
night light

in the dispenser on or off. The

light also comes on when the dispenser pad

is pressed. The light in the dispenser should

be replaced with a 7 watt maximum bulb

when it burns out.

CAUTION: Never put fingers or any other
objects into the ice crusher discharge
opening.

Spill Shelf

Advertising