Inserting the door panels – GE 162D9617P005 User Manual

Page 24

Advertising
background image

24

Customer Ser

vice

Tr

oubleshooting T

ips

Operating Instr

uctions

Safety Instr

uctions

Installation Instr

uctions

Customer Ser

vice

Tr

oubleshooting T

ips

Installation Instr

uctions

Safety Instr

uctions

Operating Instr

uctions

Customer Ser

vice

Tr

oubleshooting T

ips

Installation Instr

uctions

Safety Instr

uctions

Operating Instr

uctions

Inserting the door panels.

Install the Side Trim.

These pieces are tucked inside the fresh food door

handle.

Do not remove the protective film on the outside of the
Side Trim until the Side Trim is installed.

Fit the bottom of the Side Trim under the Bottom

Trim as illustrated.

Hold the Side Trim against the front face of the

decorator panels and fit the Side Trim under

the Top Trim. Make sure the Side Trim is fitted

correctly and that you are satisfied with the

appearance of all the parts before pulling the

tape liner.

Secure the Side Trim.

Place one hand between the two pieces of tape liner

and hold the Side Trim firmly against the panels

and the side of the door.
Pull the top tape liner up about 3² (80 mm),

pressing the trim with your hand as the adhesive

is exposed to the door. Then pull the bottom

tape liner down about 3² (80 mm). Follow the tape

with your hand, pressing the trim adhesive against

the door.

Continue pulling the tape liner loose, alternating

between the top and bottom and pressing the Side

Trim against the door.

Remove the Protective Film From the Outside of the Side Trim.

Side
Trim

Side
Trim

Bottom Trim

Tape
Liner

Tape
Liner

Top Trim

Advertising