Headset and belt clip operation, Connecting an optional headset to the handset, Connecting the belt clip – GE 25982 User Manual
Page 39
Advertising
39
Headset and Belt Clip Operation
Connecting an Optional Headset to the Handset
For hands free conversation, connect the headset (optional) to the HEADSET jack. The
handset receiver and microphone are disabled when the headset is connected.
Adjust the headset to rest comfortably on top of your head and over your ear. Move
the microphone to approximately to 3 inches from your mouth.
• Press the
TALK/CALL BACK button to answer or place a call before using the
headset.
Connecting the Belt Clip
There are two slots, one on each side of the handset.
• Attach the belt clip by inserting the sides of the belt clip into the slots. Snap the
ends of the belt clip into place.
Advertising