Problem solving, Problem cause solution – GE 106585 User Manual

Page 15

Advertising
background image

Motor will not start.

Electric Plug

Push plug securely into outlet.
Try another outlet.
Check circuit breaker.

Motor suddenly stops.

Thermal Cut Off

Refer to page 7.

Does not clean the carpet or

Dust Cup and Filter(s)

Empty the dust cup. Make sure the foam cone filter is

floor

clean and installed properly. Make sure dust cup is
installed properly and dust cup latch secured.

Belt

Replace a cut, loose or out of shape belt.

Brush Roll

Clean hair and thread from bristles and end cap area.
Replace brush roll if bristles are worn.

Hose

Remove any clogs from the hose that restrict the airflow.

No suction at the end of the

Dust Cup and Filter(s)

Empty the dust cup. Make sure the foam cone filter is

hose.

clean and installed properly. Make sure dust cup is
installed properly and dust cup latch secured.

Hose

Remove any clogs from the hose that restrict the airflow.
Check both ends of the hose. (See page 9)

Headlight not working.

Light Bulb

Replace light bulb.

Noise from the brush roll area.

Brush Roll

Remove hood and clean debris from the brush roll area.

Belt

Replace a cut, loose or out of shape belt.

Cleaner is hard to push.

Cleaner Height Setting

Turn adjustment knob to a higher position. Hint: Put
handle in operating position. Tilt the cleaner back to
raise the front wheels off floor. Then turn the knob.

Belt

Replace a cut, loose and out of shape belt.

Brush roll will not turn.

Brush Roll

Remove hood and clean debris from the brush roll area.

Belt

Replace cut, loose or out of shape belt.

Burning smell.

Brush Roll

Remove hood and clean debris from the brush roll area.

Belt

Replace cut, loose or out of shape belt.

Cleaning height knob will not

Cleaner Height Setting

Hint

: Put handle in operating position. Tilt the cleaner

turn.

back to raise the front wheels off floor. Then turn the
knob.

Missing parts or questions.

Call 1-877-556-0973 for customer assistance.

Problem Solving

NOTE: Turn off the switch and unplug the electrical cord before servicing.

PROBLEM

CAUSE

SOLUTION

3

3

3
3

3

3

3

3

3
3

3

3

3

3

3

15

3

3

3

Advertising
This manual is related to the following products: