Radar, Transmitting radar signals, Adjusting the zoom scale on the radar screen – Garmin GPSMAP 740s User Manual

Page 58: Adjusting the zoom scale on the, Radar screen

Advertising
background image

54

GPSMAP 700 Series Owner’s Manual

Radar

Radar

WARNING

The marine radar transmits microwave energy that has the potential to be harmful to humans and animals.

Before beginning radar transmission, verify that the area around the radar is clear. The radar transmits a beam

approximately 12° above and below a line extending horizontally from the center of the radar. Avoid looking

directly at the radar, because the eyes are the most-susceptible parts of the body.
When you connect your chartplotter to an optional Garmin marine radar such as a GMR

404/406 or a GMR

18/24, you can view more information about your surroundings.
The GMR transmits a narrow beam of microwave energy as it rotates in a 360° pattern. When the transmitted

energy contacts a target, some of that energy is reflected back to the radar.

Transmitting Radar Signals

1. With the chartplotter off, connect your radar as described in the radar installation instructions.
2. Turn on the chartplotter.

The radar warms up and a countdown is provided to alert you when the radar is ready.
NoTe: As a safety feature, the radar enters standby mode after it warms up. This gives you an opportunity

to verify that the area around the radar is clear before beginning radar transmission.

3. From the Home screen, select Radar.
4. Select Cruising, Harbor, offshore, or Sentry.

A countdown message appears while the radar is starting up, and the “Ready to Transmit” message appears.

5. Select Transmit.

A “Spinning Up” message appears for a few moments, and the radar begins painting an image.

Stopping the Transmission of Radar Signals

From the Radar screen, select To Standby.

Transmitting Radar Signals from any Screen

1. Press and release to open the display screen.
2. Complete an action:

• Select Transmit Radar.
• Select Radar to Standby.

Adjusting the Zoom Scale on the Radar Screen

The zoom scale, also called the radar range, represents the distance from your position (the center) to the

outermost ring. Each ring represents an even division of the zoom scale. For example, if the zoom scale is set

at three miles, each ring represents one mile from the center out.

Touch

and

to zoom out and zoom in.

Advertising
This manual is related to the following products: