Warning – Graco HUSKY 312877C User Manual

Page 5

Advertising
background image

Warnings

312877G

5

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

Do not operate the unit when fatigued or under the influence of drugs or alcohol.

Do not exceed the maximum working pressure or temperature rating of the lowest

rated system component. See

Technical Data in all equipment manuals.

Use fluids and solvents that are compatible with equipment wetted parts. See

Tech-

nical Data in all equipment manuals. Read fluid and solvent manufacturer’s warn-

ings. For complete information about your material, request MSDS from distributor

or retailer.

Do not leave the work area while equipment is energized or under pressure. Turn

off all equipment and follow the

Pressure Relief Procedure in this manual when

equipment is not in use.

Check equipment daily. Repair or replace worn or damaged parts immediately with

genuine manufacturer’s replacement parts only.

Do not alter or modify equipment.

Use equipment only for its intended purpose. Call your distributor for information.

Route hoses and cables away from traffic areas, sharp edges, moving parts, and

hot surfaces.

Do not kink or over bend hoses or use hoses to pull equipment.

Keep children and animals away from work area.

Comply with all applicable safety regulations.

PRESSURIZED EQUIPMENT HAZARD

Fluid from the gun/dispense valve, leaks, or ruptured components can splash in the

eyes or on skin and cause serious injury.

Follow

Pressure Relief Procedure in this manual, when you stop spraying and

before cleaning, checking, or servicing equipment.

Tighten all fluid connections before operating the equipment.

Check hoses, tubes, and couplings daily. Replace worn or damaged parts immedi-

ately.

THERMAL EXPANSION HAZARD

Fluids subjected to heat in confined spaces, including hoses, can create a rapid rise

in pressure due to the thermal expansion. Over-pressurization can result in

equipment rupture and serious injury.

Open a valve to relieve the fluid expansion during heating.

Replace hoses proactively at regular intervals based on your operating conditions.

WARNING

Advertising