Adding or replacing a harddrive, To add or replace a hard drive, Adding or replacing a hard drive – Gateway MAN FX510 User Manual
Page 60
Advertising

CHAPTER 4: Upgrading Your Computer
54
Adding or replacing a
hard drive
To add or replace a hard drive:
1
Remove the side panel by following the instructions in
“Removing the side panel” on page 41
.
2
If you are adding a new drive, slide the drive release
latch toward you, then go to
.
- OR -
If you are replacing an existing drive, go to the next
step.
3
Disconnect the drive cables, noting their locations and
orientation. (You will reconnect the cables after you
install the new drive.)
8512066.book Page 54 Tuesday, January 16, 2007 11:02 AM
Advertising