Gateway MAN FX510 - Manual (Page 69)

www.gateway.com
63
9 Replace the fan cover.
10 Return your computer to its upright position.
11 Replace the side panel by following the instructions in
“Replacing the side panel” on page 44 .
Replacing the I/O board
To replace the front I/O board:
1 Remove the side panel by following the instructions in
“Removing the side panel” on page 41 .
2 Remove the front bezel by following the instructions in
“Removing the front bezel” on page 43 .
3 Remove the screw that secures the front I/O assembly
to the computer, then remove the I/O assembly.
Tools
You need a Phillips screwdriver to replace the I/O board.
Screw
8512066.book Page 63 Tuesday, January 16, 2007 11:02 AM