GoVideo DDV3120 - Manual (Page 47)

41 Appendix A - Advanced Connections
S-VIDEO HOOKUP
Follow these steps to connect high-end video
equipment to the S-Video input on the back of your
VCR. You must set “Line 2 Video In” to “S-Vid” in the
menu system in order to use this connection.
1 C O N N E C T E X T E R N A L D E V I C E
T O V C R
Connect an S-Video cable from the
audio/video output of your external
device to the “S-Video In” jack on the
VCR rear panel.
2 O P E N “ M A I N M E N U ”
Press MENU.
3 S E L E C T “ V C R S E T T I N G S ”
Press 5.
4 S E L E C T “ A D V A N C E D S E T T I N G S ”
Press 7.
5 S E L E C T “ L I N E 2 V I D E O I N ”
Press 4 to set Line 2 Video In to one of
the following:
C o m p
Line 2 will be set to the standard com-
posite video input. The S-Video input
will be disabled.
S - V i d
Line 2 will be set to the S-Video input.
The Line In 2 composite video input will
be disabled.
N O T E S :
• To use the S-Video In connection, you must turn it on in the menu system.
• You can use either S-Video In OR the Line 2 input, but not both at the same time.
VCR SETTINGS
1 Child Lock Off
2 Remote Eject On
3 Panel Display Auto
4 Screen Display Auto
5 RF Output Channel Ch3
6 Clock Settings
7 Advanced Settings
/ = Move = Sel MENU = Quit
press MENU
press 5
MAIN MENU
1 Copy Settings
2 Playback Settings
3 Record/Edit Settings
4 Channel Settings
5 VCR Settings
6 Timer Recording
7 Language/Langue
/ = Move = Sel MENU = Quit
press 7
ADVANCED SETTINGS
1 Reset Factory Settings
2 Front A/V Input Line 1
3 Rear A/V Input Line 2
4 Line 2 Video In Comp
5 Line 2 A/V Out Auto
/ = Move = Sel MENU = Quit
Comp
S-Vid
Connect to S-Video
Output of External
Device; e.g., DVD
Player.