Graco Inc. Husky 239126 - Manual (Page 11)

308703 11
Service
Torque Table
Find the proper torque specifications for your surge suppressor unit in the table below. These are the torques to
which the clamp band, ring flange, or bolts in bolted units need to be tightened.
KEY: plastic = polypropylene or acetal
metal = stainless steel
rubber = fluoroelastomer or Buna–N
Model
Bladder
Material Housing
Material Type of Clamp Torque
Husky 2000 rubber plastic clamp band 45 to 55 in-lb (5.1 to 6.2 N-m)
Husky 2000 rubber plastic ring flange 65 to 70 in-lb (7.3 to 7.9 N-m)
Husky 2000 PTFE plastic ring flange 90 to 105 in-lb (10.2 to 11.9 N-m)
Husky 2000 rubber metal and plastic clamp band 30 to 40 in-lb (3.4 to 4.5 N-m)
Husky 2000 rubber metal and plastic ring flange 80 to 85 in-lb (9.0 to 9.6 N-m)
Husky 2000 PTFE metal and plastic ring flange 90 to 95 in-lb (10.2 to10.7 N-m)
Husky 2000 rubber metal bolted unit 120 to 130 in-lb (13.6 to 14.7 N-m)
Husky 2000 PTFE metal bolted unit 145 to 150 in-lb (16.4 to 16.9 N-m)
Husky 750 rubber plastic clamp band 40 to 45 in-lb (4.5 to 5.1 N-m)
Husky 750 rubber plastic ring flange 50 to 55 in-lb (5.6 to 6.2 N-m)
Husky 750 PTFE plastic clamp band 80 to 85 in-lb (6.8 to 9.6 N-m)
Husky 750 PTFE plastic ring flange 85 to 90 in-lb (9.6 to 10.2 N-m)
Husky 750 rubber metal bolted unit 80 to 85 in-lb (9.0 to 9.6 N-m)
Husky 750 PTFE metal bolted unit 110 to 115 in-lb (12.4 to 13.0 N-m)