Genie TZ-50 - Manual (Page 30)

28 Genie TZ-50 Part No. 82900
Operator's Manual First Edition • Sixth Printing
Transport and Lifting Instructions
Observe and Obey:
The transport vehicle must be parked on a level
surface.
The transport vehicle must be secured to
prevent rolling while the machine is being
loaded.
Be sure the vehicle capacity, loading surfaces
and chains or straps are sufficient to withstand
the machine weight. See the serial plate for the
machine weight.
Securing to Truck or Trailer for
Transit
Fully lower and retract the boom. Make sure the
boom and the mid-pivot rest securely in the mast
cradles.
Securely latch the boom hold-down latches.
Raise all four outriggers to the stowed position.
Always chock the machine wheels in preparation
for transport.
Turn the key switch to the off position and remove
the key before transporting.
Inspect the entire machine for loose or unsecured
items.
Securing the Chassis
Place a block under the tongue.
Place a block underneath the axle between the two
wheels.
Use the four tie-down points on the chassis for
anchoring down to the transport surface.
Use chains or straps of ample load capacity.
Use a minimum of 4 chains to secure the chassis.
Secure a strap over the tongue of the machine.
Adjust the rigging to prevent damage to the chains.