Genie TZ-50 - Manual (Page 32)

30 Genie TZ-50 Part No. 114164
Operator's Manual Second Edition • First Printing
Truck bed
Securing the Chassis
Place a block under the tongue.
Secure a strap over the tongue of the machine.
Place a block underneath the axle between the
two wheels.
Use the four tie-down points on the chassis for
anchoring down to the transport surface.
Use chains or straps of ample load capacity.
Use a minimum of 4 chains to secure the chassis.
Adjust the rigging to prevent damage to the
chains.
Securing to Truck or Trailer for
Transit
Fully lower and retract the boom. Make sure the
boom and the mid-pivot rest securely in the mast
cradles.
Securely latch the boom hold-down latches.
Raise all four outriggers to the stowed position.
Always chock the machine wheels in preparation
for transport.
Turn the key switch to the off position and remove
the key before transporting.
Inspect the entire machine for loose or unsecured
items.
TRANSPORT AND LIFTING INSTRUCTIONS