Garmin POWERLITE CINEMA 200+ - Manual (Page 46)

46
To use a memory setting you’ve saved on the projector:
Access the projector’s memory settings either from the remote control (see page 31) or by
using Cinema Color Editor as follows:
1. Select Picture Quality , then click Memory management and choose Select .
2. Click the tab where the setting you want to use is stored ( Standard or Advance ).
3. Select the desired memory setting, then click Select . After a moment, your image appears
on the screen using the selected settings.
Select
Picture Quality
Click Memory
management
Click
Select
Select Standard
or Advance
Select the setting
you want to use
Click Select
PowerLite Cinema 200+.book Page 46 Thursday, August 18, 2005 2:37 PM