Offset shelf , 12, 16, Shelves , 10, 12, 15, 16, 18, 30,34, Using your oven – GE 164D2966P087 User Manual

Page 9: 1using your oven, Oven shelves

Advertising
background image

USING YOUR OVEN

1

Using Your Oven

1.

the controls. Be sure you understand

NOTE:

set them properly. Read over the directions

the Oven Controls so you understand how to

You may notice a “burning” or “oily” smell the

first

times you turn your oven on. This is

use them.

normal in a new oven and will disappear in a short

2. Check the inside

the oven. Look the shelves.

time. To speed the process, set a self-clean cycle for

Take a practice run removing and replacing them

a minimum

3 hours. See the Operating the

properly, to give sure, sturdy support.

Cleaning Oven section.

Read over the information and tips that follow.

4. Keep this guide handy so you

refer to it,

especially during the first weeks of using your
new oven.

A

may automatically turn on and off to cool

internal parts. This is normal and the fan may
continue to run even after the oven is turned off.

Oven Shelves

The shelves are designed with stop-locks so that
when placed correctly on the shelf supports, they
will stop before coming completely out from the
oven, and will

tilt when removing food from or

placing food on them.

When placing cookware on a shelf, pull the shelf out
to the “stop” position. Place the cookware on the

then

the

back into the oven. This

reaching into the hot oven.

To remove the shelves from the oven, pull them
toward you, tilt the front end upward and pull the

shelf out.

To replace,

the shelf on the shelf support with

,

the stop-locks (curved extension of the shelf) facing
up and toward the rear of the oven. Tilt up the front

and push the shelf toward the back of the oven until it

past the bump on the

support. Then

the front

the shelf and push it

the way back.

NOTE: The shelves for the convection oven
2 inches shorter than the regular oven shelves.

9

Advertising