Turn radio/gps on/off, Informational picture, Gps status – Garmin Rino 130 User Manual

Page 30: Radio transmission status, Mark waypoint’s indicators, Reference, Radio page

Advertising
background image

16

Reference

Turn Radio/GPS On/Off

Press the

THUMB STICK

IN on either of these two options to toggle them from on to off.

For example, to turn GPS Off, press the

THUMB STICK

IN when ‘Turn GPS Off’ is highlighted.

INFORMATIONAL PICTURE

The Informational Picture on the bottom half of the Radio Page features Garmin’s Mr. Mark

Waypoint showing current GPS and radio status, and radio actions. As you operate the unit,
the graphics change depending on what actions you are taking and the unit settings.

GPS Status

Four satellites are shown on at the top of the picture along with descriptive text to indicate

GPS reception status. As the unit collects satellite information, the satellite symbols flash alter-
nately until all four are steady to indicate a 3D position fix. The more satellites that are steady,
the better your position fix.

Radio Transmission Status

As radio signals come in, signal wave symbols display to the left of Mark Waypoint.

Fragmented (or broken) signal symbols are shown to indicate activity on that channel. Audio
remains muted because the incoming signal does not match the squelch code your unit is set to.

Mark Waypoint’s indicators

The Mark Waypoint figure displays several different icons, depending on what you are do-

ing. See the following illustrations for more information.

Radio Page

Informational Picture

showing Mr. Mark

Waypoint

Informational Picture Legend

Radio in Mark’s hand = radio is ready to use.

Flag in his other hand = unit ready to transmit its position

(GPS must be On to use this feature.)

Radio waves around Mark’s radio = you are transmitting

Raised flag in his hand = peer-to-peer transmission is sent

Flag on top of the hill = a position was received

Advertising