Garmin Rino 130 - Manual (Page 47)

33
Reference
Using Sight ‘N Go
To use Sight ‘N Go to navigate:
1. Use the PAGE button to access the Navigation Page and then use the THUMB STICK to
access the Option Menu .
2. Use the THUMB STICK to highlight ‘Sight ‘N Go’ and press IN. Note that the compass ring
with pointer is in-line with the two sighting marks on the case.
3. Hold the Rino 130 at eye level and line up the two sighting marks on the case with the
distant object. Press the THUMB STICK to ‘Lock Direction’.
4. To navigate to your destination, select ‘Set Course’ and press the THUMB STICK . Begin
traveling to your destination using the pointer as a guide.
To view your destination as a waypoint, select ‘Project Waypoint’ and press the THUMB
STICK . To re-sight the destination, press the THUMB STICK IN when ‘Re-Sight’ is
highlighted.
Navigation Page
Sight ‘N Go Page
Sighting Marks
Rino 130 held level
for Sight ‘N Go