Garmin Rino 130 - Manual (Page 93)

79
Features
Setup Page
Daylight Savings Time - Can be turned On or Off or set to Automatic.
To set the time:
1. Use the PAGE button to access the Main Menu.
2. Use the THUMB STICK to highlight the Setup Icon. Press the THUMB STICK IN to display
the Setup Menu.
3. Use the THUMB STICK to highlight the Time Icon. Press the THUMB STICK IN to display
the Time Page.
4. Use the THUMB STICK to highlight the ‘Time Zone’ field. Press the THUMB STICK IN to
display the time zone list.
5. Highlight a time zone from the list and then press the THUMB STICK IN.
6. If you choose ‘Other’, you must enter a UTC offset value.
7. The correct time displays at the bottom of the page.
Units Setup Page
The Units features are best used by individuals with a working knowledge of map grids and
datums. To learn more about these subjects, visit the National Imagery and Mapping Agency at
http://www.nima.mil or inquire at your local library.
To access the Units Setup page:
1. Press the PAGE button or the Menu icon to open the Main Menu.
2. In the Main Menu, scroll down and select Setup.
3. Select the Units icon to open the Units Setup page.
Units Setup Page
Units Setup icon