GoVideo DVP950 - Manual (Page 16)

16
D2730 Networked DVD Player
Install Network Card
To install the network card:
1 Do not plug in the unit or press the POWER button on the front
panel until you have installed the network card.
2 Insert the supplied network card into the NETWORK CARD
slot on the back of the DVD player.
• Optionally, you can insert a compatible 802.11b network
card (not included) if connecting the player to a wireless net-
work.
3 Make sure the network card is properly seated.
4 Connect an Ethernet cable from the network card to any available Ethernet port on your existing home network.
:: Step 4 - Turn on the System
1 Connect the DVD player’s power cord to a standard electrical outlet.
2 Turn on the DVD player using the front panel POWER button.
• When the unit is powered on, a blue LED will glow around the front panel arrow keys.
• Use the STANDBY/ON button on the remote control to switch between on and Standby modes.
• When the unit is in Standby mode, the blue LED will turn off.
3 Turn on your TV, and select the video input connected to the DVD player.
4 Turn on your audio system (if applicable), and select the input connected to the DVD player.
5 The GoVideo splash screen will appear on your TV.
• Do not remove the network card when in use!
• If the card is removed, all activities will be reset and the net-
worked DVD player will return to its initial state.
• Basic Setup is complete! Please refer to Chapters 3 and 4 to begin enjoying
the networking and DVD playback features of your D2730.
• For advanced settings, please refer to Chapter 5.
Insert Network Card Insert Ethernet Cable