Go-Video DDV9485 - Manual (Page 42)

32 DDV 9485 USER ’S GUIDE
Remove Channel
1
2
3
Follow these steps to remove a
channel that was stored during
Auto Channel Search. Open “Setup Menu”
Press and hold the Menu button for 3
seconds.
Select “Tuner & Channel List”
Press 3.
Select “Remove Channel”
Press the down arrow until Remove Channel
is selected.
Tune the Channel
Use the Ch +/– buttons or the number keys
(0-9) to enter the channel number.
Remove the Channel
Press the right arrow to remove the selected
channel from your channel list. Repeat steps
4 and 5 to remove additional channels.
SETUP MENU
1 Set Clock Menu
2 : Copy/Record Settings
3 : Tuner And Channel List
4 : Dual-Deck Features
5 : Reset Factory Settings
____________________________________
/ = Move = Sel MENU=Quit ➔
➔ ➔
➔
TUNER AND CHANNEL LIST
CH ##
Tuner Band Auto
Auto Channel Search
Add Channel
Remove Channel
Show Weak Channels
No
Tuner Audio Stereo
____________________________________
/ = Move = Sel MENU=Quit ➔
➔ ➔
➔
4
5
TUNER AND CHANNEL LIST
CH ##
Tuner Band Auto
Auto Channel Search
Add Channel
Remove Channel
Show Weak Channels
No
Tuner Audio Stereo
____________________________________
/ = Move = Sel MENU=Quit ➔
➔
➔
➔
TUNER AND CHANNEL LIST
CH 11
Tuner Band Auto
Auto Channel Search
Add Channel
Remove Channel
Show Weak Channels
No
Tuner Audio Stereo
____________________________________
/ = Move = Sel MENU=Quit ➔ ➔ ➔
➔
TUNER AND CHANNEL LIST
CH 11
Tuner Band Auto
Auto Channel Search
Add Channel
Remove Channel
Show Weak Channels
No
Tuner Audio Stereo
____________________________________
/ = Move = Sel MENU=Quit ➔ ➔ ➔
➔