Go-Video DDV9485 - Manual (Page 95)

APPENDIX A - MULTI - BRAND REMOTE SETUP 85
Appendix A
Multi-Brand Remote Setup
You can program your remote
control to operate many
popular brands of televisions,
cable boxes, and digital
satellite systems (DSS). 1
2
Turn On TV
Press the power button on your TV.
Program TV Code
Press and hold down the TV button while
entering the 2-digit code for your brand of
television from the list at the right.
Check Your Results
If the TV advances to the next active channel,
programming is complete! If the TV does not
respond, try another 2-digit code. Some TV’s
are not listed but can be programmed.
Program Cable Box/DSS Code
Press and hold down the Cable/DSS button
while entering the 2-digit code for your brand
of Cable Box/DSS from the list on the next
page.
Check Your Results
If the Cable Box/DSS receiver powers on OR
off, programming is complete! If not, try
another 2-digit code. Some devices are not
listed but can be programmed.
TV CODES
Samsung (old) TV + 01
Sharp (new) TV + 02
Sony TV + 03
Magnavox TV + 04
Sanyo TV + 05
Goldstar (new) TV + 06
RCA/GE TV + 07
Goldstar (old) TV + 08
Toshiba TV + 09
Hitachi TV + 10
JVC TV + 11
Panasonic TV + 12
Mitsubishi TV + 13
Samsung (new) TV + 14
Samsung (Latin) TV + 15
Sharp (old) TV + 16
Zenith TV + 17
Goldstar TV + 18
Daewoo TV + 19
Sanyo (PAL) TV + 20
Emerson TV + 21
Sharp (PAL) TV + 22
Samsung (Latin) TV + 23
Panasonic 2 TV + 24
ON
3
4
5