Go-Video DDV9485 - Manual (Page 72)

62 DDV 9485 USER ’S GUIDE
Tape Missing
No videotape in Deck 2.
• Insert a videotape in Deck 2.
Tape Missing Tab
No Record Safety Tab in videocassette.
• Insert a video cassette with the record safety
tape intact, or place a small piece of adhesive
tape over the opening to permit recording.
Not Ready
Deck 2 is not in Stop mode (i.e. it is playing,
rewinding, etc.).
• Press Stop on Deck 2.
Overlapping Events
Two or more events are programmed to occur at
the same time:
• When you program a new event, the VCR
checks all timer events for conflicts. If two
events overlap, you will be prompted to either
delete one of the events, or allow them to
overlap.
• If events overlap, the first event will be
completely recorded, then the next event
starts and the remainder of that event is
recorded.
Timer Recording Errors
If there is a problem with your
Timer Recording, the word
Timer will flash on the Front
Panel Display and an error
message will appear on the
On-Screen Display. Once you
correct the error, the event will
begin if there is still time
remaining for that event.
Copy Tape Power
Deck Select Record Rewind Play F. Forward Pause Stop / Eject
Hi-Fi Deck Hi-Fi Deck
DDV9485
Record Safety Tab
TIMER EVENTS OVERLAP
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16
Please review the events
from the Select Event
menu and remove one
using the CLEAR key
_____________________________________
MENU to Continue
SELECT EVENT [1-16]:01
1 10:30 PM On Wednesdays
1H30M Ch10 Deck2 Auto
2 : 9:00 AM On Sun Dec/06
0H30M Line1 Deck2 SP
3 : 7:00 PM On Mon-Fri
2H00M Line2 Deck2 SLP
4 : 12:15 PM On Everyday
0H15M Ch06 Deck2 Auto
/ = Move = Sel MENU=Quit ➔
➔
➔
➔