GE CG400 - Manual (Page 31)

27
Dew indicator
flashing in the LCD
window
Viewfinder displays
are not clear
Vertical white lines
appear when shoot-
ing bright object
Cannot see video
during playback
( ) indicator
flashing in LCD
window
• If the dew indicator ( ) flashes in the LCD window,
there is moisture in the camcorder. Wait until this
indicator no longer appears before operating the
camcorder.
• Lens may be smudged and need to be cleaned. See the “Care
and Maintenance” section on page 25.
• This may occur when background extremely contrasts
with the subject.
• Camcorder must be connected to a TV (or VCR) to see
video during playback.
• The camcorder’s video head is clogged or dirty. Contact
an Authorized GE Camcorder Servicenter.
Trouble Checks and Adjustments
Information to User
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not
cause harmful interference, and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Alterations or modifications carried out
without appropriate authorization may
invalidate the user’s FCC right to operate the
equipment.