Setting all volume/mute controls to any mode, Setup (cont.) – GE 24958 User Manual
Page 11
11
Setting ALL Volume/Mute Controls to
Any Mode
You.can.set.all.modes.to.“punch-through”.to.any.
mode.for.Volume/Mute.control.without.needing.to.
change.to.that.mode.by.doing.the.following.
1...Press.and.hold.
SETUP until.the.indicator.
remains.on,.then.release.
SETUP.
2...Press.and.hold.
MUTE.until.the.indicator.blinks.
off,.then.release.the.button.
3...Press.and.release.
SELECT to.select.the.
desired.mode.(
TV,.DVD,.etc.).for.Volume/Mute.
control;.the.indicator.blinks,.then.stays.on.
4...Press.and.release.
MUTE;.the.indicator.turns.
off..
Note: The.indicator.will.blink.rapidly.for.3.
seconds.if.the.mode.you.have.selected.does.
not.have.Volume/Mute.control..
5...All.other.modes.will.now.“punch-through”.to.
your.chosen.mode.for.Volume/Mute.control.
Setting Any Mode to Use its Own
Volume/Mute Control
You.can.set.any.mode.to.use.only.its.own.Volume/
Mute.control..
Note:.If.your.chosen.mode.does.not.have.Volume/
Mute.functions,.then.this.remote’s.
VOLUME and.
MUTE.will.not.operate.
1...Press.and.hold.
SETUP until.the.indicator.
remains.on,.then.release.
SETUP.
2...Press.and.hold.
MUTE.until.the.indicator.blinks.
off,.then.release.the.button.
3...Press.and.release.
SELECT to.select.the.
desired.mode.(
TV,.DVD,.etc.);.the.indicator.
blinks,.then.stays.on.
4...Press.and.release.
VOLUME-.(down);.the.
indicator.blinks,.then.stays.on.
5...Press.and.release.
MUTE;.the.indicator.turns.
off..
6...All.modes.will.now.“punch-through”.to.the.
respective.modes.you.have.chosen.for.Volume/
Mute
control.
Setup (cont.)