Under-deck-mounting the gxm 51 antenna – Garmin Gxm 51 User Manual

Page 4

Advertising
background image



GXM 51 Installation Instructions

To mount the GXM 51 with the cable routed through the pole:

1. Position a standard 1 in. OD pipe-threaded-pole marine mount (14 threads per inch—not

included) in the preferred location, and mark the approximate center of the pole.

2. Drill a hole using a

3

/

4

in. (19 mm) drill bit for the cable to pass through.

3. Fasten the pipe-threaded pole marine mount to the boat.
4. Thread the pole-mount adapter onto the pole. Do not overtighten the adapter.
5. Route the NMEA 2000/audio cable through the pole and connect it to the GXM 51 antenna.
6. Place the GXM 51 antenna on the pole-mount adapter

and twist it clockwise to lock it in

place

.

7. Secure the antenna to the adapter with the included M3 set screw

.

8. (Optional) With the GXM 51 installed on the pole mount, fill the vertical cable slot with a

marine sealant (not included).

9. Route the NMEA 2000/audio cable away from sources of electronic interference, and

connect it to your NMEA 2000 network and to the audio input of your stereo receiver

(see

page 5

).

Under-deck-mounting the GXM 51 Antenna

The GXM 51 can be mounted under a fiberglass surface with the adhesive pads attached to the

under-deck mounting bracket. The GXM 51 will not acquire satellite signals through metal—

you can only use the under-deck mount under a fiberglass surface.

1. Determine the location on the

fiberglass surface where you

want to mount the GXM 51.

2. Place the adhesive pads on

the under-deck mounting

bracket.

3. Place the GXM 51 in the

under-deck mounting bracket.

4. Adhere the under-deck

mounting bracket to the

mounting surface.

5. Secure the under-deck mount

to the mounting surface with

screws. Use extreme care to ensure that the screws do not penetrate the upper surface of

the deck.

6. Connect the NMEA 2000/audio cable to the GXM 51.
7. Route the NMEA 2000/audio cable away from sources of electronic interference, and

connect it to your NMEA 2000 network and to the audio input of your stereo receiver (see

step 3 below).

GXM 51

antenna

Under-deck

mounting bracket

Mounting

surface

Adhesive

pads

GXM 51

antenna

Under-deck

mounting bracket

Mounting

surface

Adhesive

pads

Advertising