Giantec tracer2000 - Manual (Page 33)

tracer2000 Network DVR Hardware User’s Manual
Version 3.1 Page 25 of 31
2.5 Power Management Setup
Use this menu to specify your settings for power management.
ACPI Function Disabled Item Help
ACPI Suspend Type S1 (POS)
Power Management User Define Menu Level ¾
Video Off Method DPMS
Video Off In Suspend Yes
Suspend Type Stop Grant
Modem Use IRQ 3
Suspend Mode Disabled
HDD Power Down Disabled
Soft-off by PWR-BTTN Instant-off
Wake-up by PCI Card Disabled
Power On By Ring Enabled
USB KB Wake-up From S3 Disabled
PWRON After PWR-Fail Former-sts
CPU Thermal-throttling 50.0%
Resume by Alarm Disabled
X Date (of Month) Alarm 0
X Time (hh: mm: ss) Alarm 0 0 0
** Reload Global Timer Events **
Primary IDE 0 Disabled
Primary IDE 1 Disabled
Secondary IDE 0 Disabled
Secondary IDE 1 Disabled
FDD, COM, LPT Port Disabled
PCI PIRQ [A-D]# Disabled
↑↓←→Move
F10: Save
F5: Previous Values
Enter: Select
ESC: Exit
F6: Fail-safe Defaults +/-/PU/PD: Value
F1: General Help
F7: Optimized Defaults