GE GFK-2193A - Manual (Page 26)

GFK-2193A Chapter 4 Status and Diagnostics 4-9
4
Network Parameter Errors
The following errors codes may be returned in bits 0—6 in the Get Slave Status reply.
Note: The error code is the numerical value of the bits.
Error
Code Meaning
0 No error
1 ID from master does not match Slave ID
2 Ready Time from Master does not match Slave Ready time
3 Master is requesting Freeze or Sync, which is not supported
by the slave
4 Length of data from master to slave is incorrect
5 Length of data from slave to master is incorrect
6 One of the watchdog factors (SlvWdFact1 or SlvWdFact2)
from the master was 0.
7 Slave watchdog time out (check response timeout)
8 Slave timeout watchdog disabled from master