Gateway DV-S20 - Manual (Page 26)

22
OSD Menu Description
Setup Format. Formats and erases the internal memory. Also
formats and erases an optional SD memory card.
Beep. Turns audible mode on and off. Your camcorder
beeps whenever a button is pressed when this mode is on.
Speaker. Turns the volume of the built-in speaker up or
down.
LCD brightness. Adjusts the brightness of the LCD display.
Power off. Sets the power save mode.
Reset to default. Resets camcorder settings to the factory
default.
Date type. Selects the date format that will be imprinted on
your images.
Date setup. Sets the date and time.
Date imprint. Turns date imprinting on and off.
Video out. Select NTSC format for U.S., Canada, and
Mexico.
Light freq. Sets the frequency for the CMOS sensor.
Language. Changes the language of the OSD menus.
Exit: MENU Change:
Format
Beep
Speaker
LCD brightness
Power off
On
5
0
Cancel
Record Setup
Exit: MENU Change:
Reset to default
Date type
Date setup
Date imprint
Video out
Y/M/D
On
NTSC
Record Setup
Exit: MENU Change:
Light freq.
Language
60Hz
Record Setup
09449.book Page 22 Tuesday, September 16, 2003 5:04 PM