Gateway DV-S20 - Manual (Page 48)

44
To connect to your TV or VCR:
1 Connect the single connector of the AV cable that came with your
kit to the video out connector on your camcorder.
2
Connect the yellow video connector on the AV cable to the yellow
video in jack on the back of your TV or VCR.
3 Connect the red (R) and white (L) audio connectors to the R and L
audio-in jacks on the back of your TV or VCR.
See the documentation that came with your TV or VCR for additional
information.
Tips & Tricks Connect your camcorder to transfer the
recorded video and still images to tape.
09449.book Page 44 Tuesday, September 16, 2003 5:04 PM