Gateway DV-S20 - Manual (Page 39)

35
Using the self-timer
Use the self-timer so you can join the picture when taking group shots.
After the self-timer is set, the self-timer lamp blinks slowly for 7 seconds,
then blinks rapidly for the last 3 seconds prior to shutter release. Self-timer
mode automatically turns off after an image is taken.
To use the self-timer:
1 Attach your camcorder to a tripod or place it on a stable surface.
2 Turn on your camcorder.
3 Open the LCD display on your camcorder 90 degrees.
4
Compose the photograph.
5 Press the Self-timer button, then press the Image shutter button to
activate the count-down. The count-down appears on the LCD
display.
Press the Self-timer button again to cancel the self-timer.
09449.book Page 35 Tuesday, September 16, 2003 5:04 PM